Langridge’s Decorative range includes antique metal coatings for achieving specialty finishes on virtually any surface.
Paint on genuine rust & verdigris finishes simply and easily with our complete system of primer, metal base, oxidiser and sealer.
For interior and exterior application. Water based acrylic-styrene binder gives the paint excellent weather resistance in outdoor application.
Black Decorative Primer
Especially formulated for use with Langridge ‘metal bases’, new Langridge Black Decorative Primer will ensure optimum results with Rust and Verdigris Bases on a wide range of surfaces including plastics, timber, brick, render and cement.
No prior sealing needed: Black Decorative Primer is a sealer and primer in one. It is both fluid and highly opaque for ease of brushing that does not need further dilution. Sufficient for most surfaces in a single coat or two coats for extremely absorbent substrates.
Rust Base
Simply apply Langridge Rust Base over the primer coat, react with Oxidising Patina and watch the real orange-red rust appear almost instantly.
MSDS
Verdigris Base
Now rivalling Rust Base in popularity, this copper-based paint can be applied to anything that Rust Base can.
Verdigris Base, reacted with Oxidising Patina will provide a classic, real green-grey verdigris patina onto almost any surface.
MSDS
Oxidising Patina
To activate your Rust or Verdigris finish simply apply Oxidising Patina and wait.
The longer the oxidising patina stays wet when applied, the stronger the reaction and brighter the final patina will be. Try experimenting to find the effect you want. After approximately 45 minutes when applying to Rust Base a red rust is created. Leaving the surface wet for around 90 minutes will result in a bright orange-yellow colour.
MSDS
Patina Sealer
Use to ‘lock-in’ the patinated metal finish. Recommended when applying rust or verdigris finishes in exterior applications to prevent changes in the patinated finish when exposed to rain over extended periods of time.
Leave to air dry.